• Total table size 60' x 12' with unlimited weight capacity
• Maximum milling feed rate of 1,200 inches per minute
• Thermal compensation capability along X axis 60'
• M & H Digital probe and part verification software on both heads
• M & H work piece alignment probe and software on both heads
• Total machineable envelope along X axis 60' and along Y axis 11.6' with 84.0"" of clearance under spindle face and 114.0" under the bridge
• 5-axis milling head limits along A axis pivot +90, -110 degrees
and along C axis 720 degrees of rotation
• Hsk 100 taper with a maximum rpm of 14,000 along with a 40 position tool changer
• Hsk 63 taper with a maximum rpm of 24,000 along with a 42 position tool changer
• Environmentally friendly milling coolant with a capacity of 4000 gallons to meet most nuclear and aerospace chemical requirements

This machine will also allow reverse engineering of existing parts, such as helicopter cockpits, tail structures, etc., to produce replacements. This is one of the largest CMMs in the midwest.